ITExamDump의Symantec ST0-148인증시험의 자료 메뉴에는Symantec ST0-148인증시험실기와Symantec ST0-148인증시험 문제집으로 나누어져 있습니다.우리 사이트에서 관련된 학습가이드를 만나보실 수 있습니다. 우리 ITExamDump의Symantec ST0-148인증시험자료를 자세히 보시면 제일 알맞고 보장도가 높으며 또한 제일 전면적인 것을 느끼게 될 것입니다.
Symantec ST0-148인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면Symantec ST0-148인증시험이 아주 좋은 자격증입니다. 만약Symantec ST0-148인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.
ITExamDump의 Symantec인증ST0-148시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Symantec인증ST0-148시험덤프자료를 제공받을수 있습니다.
IT업계에 종사하시는 분들은 IT인증시험을 통한 자격증취득의 중요성을 알고 계실것입니다. ITExamDump에서 제공해드리는 인증시험대비 고품질 덤프자료는 제일 착한 가격으로 여러분께 다가갑니다. ITExamDump덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.덤프를 구입하시면 일년무료 업데이트서비스, 시험불합격시 덤프비용환불 등 퍼펙트한 서비스도 받을수 있습니다.
ST0-148인증시험은Symantec사의 인중시험입니다.Symantec인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이Symantec인증ST0-148시험을 응시합니다.하지만 실질적으로ST0-148시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.
ITExamDump의 제품을 구매하시면 우리는 일년무료업데이트 서비스를 제공함으로 여러분을 인증시험을 패스하게 도와줍니다. 만약 인증시험내용이 변경이 되면 우리는 바로 여러분들에게 알려드립니다.그리고 최신버전이 있다면 바로 여러분들한테 보내드립니다. ITExamDump는 한번에Symantec ST0-148인증시험을 패스를 보장합니다.
시험 번호/코드: ST0-148
시험 이름: Symantec (Veritas Storage Foundation 6.0 for UNIX Technical Assessment )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 109 문항
업데이트: 2014-03-24
ITExamDump의 Symantec인증 ST0-148덤프를 선택하여Symantec인증 ST0-148시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고Symantec인증 ST0-148시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. Symantec인증 ST0-148덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
ST0-148 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-148.html
NO.1 An administrator needs to move all data volumes and disks in diskgroup appdg into an existing
diskgroup named webdg. The end result will yield one diskgroup on the system: webdg. Which command
should the administrator use to move the data volumes?
A. vxdg move appdg webdg
B. vxdg split appdg webdg
C. vxdg join appdg webdg
D. vxdg add appdg webdg
Answer: C
Symantec ST0-148 dumps ST0-148 ST0-148
NO.2 Which command resizes the file system without changing the volume size?
A. tunefs
B. vxresize
C. fsadm
D. vxfsadm
Answer: C
Symantec ST0-148시험문제 ST0-148 ST0-148 dumps
NO.3 A system with a single, locally mounted file system loses power and is subsequently restarted. All
hardware is functioning properly and the intent log is valid. The administrator then mounts the file system
using the mount command. What is the expected behavior.?
A. Mount will replay the intent log.
B. Mount prints an error stating that a fsck log replay will be required.
C. Mount succeeds silently as normal.
D. Mount prints an error message stating that a full fsck will be required.
Answer: A
Symantec인증 ST0-148 ST0-148 ST0-148인증
NO.4 A Veritas Volume Manager (VxVM) disk named Disk_4 has been removed from the datadg disk group.
Which command is used to remove this disk from Veritas Volume Manager (VxVM) control?
A. vxdisk -g datadg rmdisk Disk_4
B. vxdiskunsetup Disk_4
C. vxdg -g datadg rmdisk Disk_4
D. vxdisksetup -r Disk_4
Answer: B
Symantec ST0-148인증 ST0-148자격증
NO.5 What is the default private region size for Veritas Volume Manager (VxVM) disks?
A. 8MB
B. 16MB
C. 32MB
D. 64MB
Answer: C
Symantec자격증 ST0-148 ST0-148 ST0-148 ST0-148
NO.6 Which command can an administrator use to display the bsize and logsize used on an existing file
system?
A. mkfs
B. fsadm
C. mount
D. fsmap
Answer: A
Symantec ST0-148시험문제 ST0-148 ST0-148자료
NO.7 Which virtual storage configuration can be created with Veritas Storage Foundation 6.0 for UNIX?
A. LVM
B. RAID
C. SVM
D. LPAR
Answer: B
Symantec시험문제 ST0-148시험문제 ST0-148 ST0-148인증 ST0-148
NO.8 Veritas File System (VxFS) is an extent based file system. Which two pieces of information form the
basis of an extent? (Select two.)
A. inode number
B. offset
C. length
D. owner's UID
E. block size
Answer: B,C
Symantec기출문제 ST0-148 ST0-148 ST0-148 ST0-148기출문제 ST0-148
NO.9 A user creates a 10MB file, which is then compressed using vxcompress to reduce the file size to 1MB.
Another user copies this file to a different Veritas File System (VxFS) on the same host using cp. What is
the resulting file size of the copy?
A. 1MB
B. 9MB
C. 10MB
D. 11MB
Answer: C
Symantec ST0-148 ST0-148
NO.10 Which region stores the information that manages virtual devices when a LUN is brought under Veritas
Storage Foundation 6.0 for UNIX control?
A. private region
B. VTOC region
C. virtual region
D. public region
Answer: A
Symantec ST0-148 ST0-148 ST0-148자료
NO.11 Which two conditions are applicable to disks of a disk group that have been destroyed with the vxdg
destroy command without re-deploying the disks? (Select two.)
A. The destroy operation retains the on-disk disk group ID, which makes the disk group recoverable.
B. The destroy operation clears the on-disk disk group ID, which makes recovery impossible.
C. The destroy operation clears the on-disk disk group name and makes disks available for use in other
disk groups.
D. The destroy operation clears the on-disk disk group name and re-initializes all of the disks.
E. The destroy operation deports the disk group and re-formats all of the disks.
Answer: A,C
Symantec dumps ST0-148 ST0-148
NO.12 What enables combining disks or LUNs into logical collections to make administration easier?
A. volume
B. plex
C. subdisk
D. disk group
Answer: D
Symantec ST0-148 ST0-148 ST0-148인증 ST0-148 ST0-148 pdf
NO.13 The disk group appdg is imported onto host01 using the vxdg -t import appdg command. Volumes
have been started and file systems mounted. The system is then gracefully rebooted. What happens to
the appdg disk group after host01 has restarted?
A. The appdg disk group is automatically imported; all volumes in the disk group are automatically started.
B. The appdg disk group is automatically temporarily imported; all volumes in the disk group are
automatically started.
C. The appdg disk group remains deported; only host01 can import the disk group using the vxdg import
appdg command.
D. The appdg disk group remains deported; any host that can access the appdg disk group can import it.
Answer: D
Symantec인증 ST0-148 dump ST0-148덤프 ST0-148 ST0-148자료 ST0-148
NO.14 An administrator plans to move disks EMC_11 and EMC_12 from diskgroup appdg to diskgroup webdg.
There are several volumes residing on both disks, so the administrator needs a list of volumes that will be
affected for planning purposes. Which command should the administrator use to generate the list?
A. vxdg listclone appdg webdg
B. vxdg listmeta EMC_11 EMC_12
C. vxdg list appdg webdg
D. vxdg listmove appdg webdg EMC_11 EMC_12
Answer: D
Symantec인증 ST0-148 dumps ST0-148 ST0-148기출문제 ST0-148 dump ST0-148인증
NO.15 Which command line utility is used to view Veritas Volume Manager (VxVM) plexes?
A. vxdisk
B. vxdg
C. vxplex
D. vxprint
Answer: D
Symantec자료 ST0-148 ST0-148자료
ITexamdump의 700-104덤프의 VCE테스트프로그램과 MB2-866덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-690시험에 대비한 고품질 덤프와 MSC-331시험 최신버전덤프를 제공해드립니다. 최고품질 300-208시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기