ITExamDump의 경험이 풍부한 전문가들이Novell 050-710인증시험관련자료들을 계획적으로 페펙트하게 만들었습니다.Novell 050-710인증시험응시에는 딱 좋은 자료들입니다. ITExamDump는 최고의 덤프만 제공합니다. 응시 전Novell 050-710인증시험덤프로 최고의 시험대비준비를 하시기 바랍니다.
여러분이 다른 사이트에서도Novell인증050-710시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.우리덤프의 문제와 답으로 여러분은 꼭 한번에Novell인증050-710시험을 패스하실 수 있습니다.
우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Novell 050-710시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.
시험 번호/코드: 050-710
시험 이름: Novell (Novell Certified Linux Administrator)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 134 문항
업데이트: 2013-10-31
만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로Novell인증050-710험을 패스하실 수 있습니다,
050-710 덤프무료샘플다운로드하기: http://www.itexamdump.com/050-710.html
NO.1 Which is the main configuration file for logrotate?
A. /etc/logrotate
B. /etc/logr.conf
C. /etc/cron/logrotate
D. /etc/logrotatE. conf
Answer: D
Novell 050-710시험문제 050-710자격증 050-710
NO.2 Which command is used to enter or change the quota for user tux?
A. quotacheck
B. repquota tux
C. edquota -u tux
D. edquota -g tux
E. /sbin/quotaon tux
Answer: C
Novell최신덤프 050-710기출문제 050-710 050-710 050-710
NO.3 You would like to run command1 and then command2, whether or not command1 completed
successfully. Which command accomplishes this task?
A. command1 | command2
B. command1 ; command2
C. command1 > command2
D. command1 & command2
Answer: B
Novell 050-710 050-710 050-710
NO.4 What information do you need to set up an LDAP client? (Choose 4.)
A. LDAP version
B. LDAP base DN
C. Kind of encryption
D. Synchronization frequency
E. Address of the LDAP server
F. File name of the LDAP database
Answer: ABCE
Novell덤프 050-710시험문제 050-710 dump
NO.5 In which file is the host name of a Linux computer configured? (Hint: You do not need to include the
entire patH. )
Answer:______
Answer:
NO.6 You want to view the last 20 lines of the /var/log/messages file and any new lines that are subsequently
added by syslog to this filE. Which command would you use?
A. tail -20f /var/log/messages
B. end -20f /var/log/messages
C. less -20f /var/log/messages
D. follow -20 /var/log/messages
Answer: A
Novell dump 050-710 dumps 050-710 050-710
NO.7 Which statements about the LVM components are correct? (Choose 2.)
A. A volume group is part of a logical volumE.
B. Logical volumes are grouped in a master group.
C. A volume group always consists of one physical volumE.
D. A physical volume can be a partition or an entire hard disk.
E. A volume group can be reduced in size by removing physical volumes.
F. The operating system accesses the volume groups like conventional physical partitions.
Answer: DE
Novell덤프 050-710 050-710자격증 050-710 dumps 050-710
NO.8 Which command can be used to view the inode assigned to a filename?
A. ls -i
B. fsck -h -i
C. inode --list
D. cat /proc/inodes
Answer: A
Novell 050-710 050-710자료 050-710 050-710시험문제
NO.9 Why are the noauto and users options used with /etc/fstab?
A. A normal user is not allowed to access this partition.
B. They allow any user to mount and unmount a partition.
C. They specify the partitions that are bootable by a user.
D. They specify the partitions that are not bootable by a user.
Answer: B
Novell자격증 050-710기출문제 050-710기출문제
NO.10 Which command can you use to create a Reiser file system on the sda6 partition? (Choose 2.)
A. mkreiserfs /dev/sda6
B. fdisk.reiserfs /dev/sda6
C. makE. reiserfs /dev/sda6
D. fdisk -t reiserfs /dev/sda6
E. mkfs -t reiserfs /dev/sda6
Answer: AE
Novell시험문제 050-710 050-710 050-710
NO.11 What is the correct order of steps to change the partition table using fdisk?
A. You can't use fdisk to change a partition tablE.
B. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Reboot.
C. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Load the
partition table from the boot prompt.
D. Start fdisk > Change the partition table > Write the partition table to floppy disk or USB stick > Exit
fdisk > Boot from floppy disk or USB stick.
Answer: B
Novell 050-710최신덤프 050-710 050-710 dump
NO.12 As system administrator root, you use the lpoptions command to change printer options, such as the
page sizE. To which file are these options saved?
A. ~/.bashrc
B. ~/.lpoptions
C. /etc/cups/lpoptions
D. /etc/sysconfig/cups
Answer: C
Novell 050-710 050-710 dump 050-710
NO.13 Which command can you use to check an ext2/ext3 file system for a correct superblock, faulty data
blocks, or faulty allocation of data blocks?
A. df
B. du
C. fdisk
D. e2fsck
E. reiserfsck
Answer: D
Novell pdf 050-710 050-710 pdf 050-710
NO.14 What is the minimum number of partitions required by a SLES 10 system?
A. None
B. 1
C. 2
D. 4
Answer: C
Novell 050-710시험문제 050-710최신덤프 050-710 050-710 050-710덤프
NO.15 How large is an inode?
A. 256 bits
B. 64 Kbytes
C. 128 bytes
D. 1 Mbyte
Answer: C
Novell자료 050-710자료 050-710 pdf 050-710
NO.16 Which statement about the /sbin/ldconfig command is correct?
A. The ldconfig command is used to link directories.
B. The ldconfig command is used to configure an LDAP connection.
C. The ldconfig command is used to update the software library cachE.
D. The ldconfig command is used to show dynamic libraries needed by a program.
Answer: C
Novell시험문제 050-710시험문제 050-710 050-710 pdf
NO.17 Which statements about partitions are correct? (Choose 3.)
A. Extended partitions can be subdivided into logical partitions.
B. A primary partition consists of a continuous range of cylinders.
C. Logical partitions do not require entries in the main partition tablE.
D. If you use only primary partitions, you are limited to eight partitions per disk.
E. SUSE Linux Enterprise Server 10 can only be installed on a primary partition.
F. To install more than one operating system on a partition, the partition has to include the entire cylinder
rangE.
Answer: ABC
Novell기출문제 050-710 pdf 050-710 pdf 050-710최신덤프
NO.18 Which are journaling file systems? (Choose 3.)
A. XFS
B. ext2
C. ext3
D. VFAT
E. minix
F. VFAT32
G. ReiserFS
Answer: ACG
Novell자료 050-710 050-710자격증 050-710자료
NO.19 Which user authentication methods can be used with SLES 10? (Choose 4.)
A. NIS
B. WEP
C. SSH
D. PAM
E. LDAP
F. Handshake
G. Windows Domain
H. Local (/etc/passwd)
Answer: AEGH
Novell 050-710 050-710 050-710 050-710
NO.20 Waht is the correct syntax for mounting the second partition of the first SCSI hard disk?
A. mount /mnt /dev/hda2
B. mount /dev/hda2 /mnt
C. mount /dev/sdb1 /mnt
D. mount /mnt /dev/sdb1
E. mount /dev/sda2 /mnt
F. mount /mnt /dev/sda2
Answer: E
Novell 050-710 dumps 050-710 pdf 050-710시험문제
ITexamdump의 HP2-B25덤프의 VCE테스트프로그램과 BAS-013덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 CAT-500시험에 대비한 고품질 덤프와 LOT-406시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-B103시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기