ITExamDump는 IT인증시험 자격증 공부자료를 제공해드리는 전문적인 사이트입니다. ITExamDump제품은 100%통과율을 자랑하고 있습니다. Microsoft인증 070-561-Csharp시험이 어려워 자격증 취득을 망설이는 분들이 많습니다. ITExamDump가 있으면 이런 걱정은 하지 않으셔도 됩니다. ITExamDump의Microsoft인증 070-561-Csharp덤프로 시험을 한방에 통과하여 승진이나 연봉인상에 도움되는 자격증을 취득합시다.
ITExamDump의 덤프선택으로Microsoft 070-561-Csharp인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.
지금 사회에 능력자들은 아주 많습니다.it인재들도 더욱더 많아지고 있습니다.많은 it인사들은 모두 관연 it인증시험에 참가하여 자격증취득을 합니다.자기만의 자리를 확실히 지키고 더 높은 자리에 오르자면 필요한 스펙이니까요.070-561-Csharp시험은Microsoft인증의 중요한 시험이고 또 많은 it인사들은Microsoft자격증을 취득하려고 노력하고 있습니다.
지금 같은 정보시대에, 많은 IT업체 등 사이트에Microsoft 070-561-Csharp인증관련 자료들이 제공되고 있습니다, 하지만 이런 사이트들도 정확하고 최신 시험자료 확보는 아주 어렵습니다. 그들의Microsoft 070-561-Csharp자료들은 아주 기본적인 것들뿐입니다. 전면적이지 못하여 응시자들의 관심을 쌓지 못합니다.
시험 번호/코드: 070-561-Csharp
시험 이름: Microsoft (TS:MS.NET Framework 3.5,ADO.NET Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 100 문항
업데이트: 2013-11-14
성공을 위해 길을 찾고 실패를 위해 구실을 찾지 않는다는 말이 있습니다. Microsoft인증 070-561-Csharp시험이 영어로 출제되어 시험패스가 너무 어렵다 혹은 회사다니느라 공부할 시간이 없다는 등등은 모두 공부하기싫은 구실에 불과합니다. ITExamDump의 Microsoft인증 070-561-Csharp덤프만 마련하면 실패를 성공으로 바꿀수 있는 기적을 체험할수 있습니다.제일 간단한 방법으로 가장 어려운 문제를 해결해드리는것이ITExamDump의 취지입니다.
수많은Microsoft인증 070-561-Csharp시험공부자료중에서ITExamDump의Microsoft인증 070-561-Csharp덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의Microsoft인증 070-561-Csharp덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의Microsoft인증 070-561-Csharp덤프가 있으면 힘든Microsoft인증 070-561-Csharp시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의Microsoft인증 070-561-Csharp덤프로 시험준비 공부를 하는것입니다.
070-561-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-561-Csharp.html
NO.1 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a database named ContosoDB. The database resides on a server
named ContosoSrv. You generate the following files: A storage schema definition file named
Contoso.ssdl A conceptual schema definition file named Contoso.csdl A mapping schema
definition file named Contoso.msl You alter the contents of the Contoso.csdl and Contoso.msl
files. You need to generate the .NET Framework entities from the altered schema definitions.
Which command should you use?
A.Edmgen.exe /mode:EntityClassGeneration /project:Contoso /incsdl:Contoso.csdl
B.Edmgen.exe /mode:FromSsdlGeneration /project:Contoso /inssdl:Contoso.ssdl
/outcsdl:Contoso.csdl
C.Edmgen.exe /mode:ViewGeneration /project:Contoso /inssdl:Contoso.ssdl /incsdl:Contoso.csdl
/inmsl:Contoso.msl /outobjectlayer:Contoso
D.Edmgen.exe /mode:FullGeneration /project:Contoso /provider:System.Data.SqlClient
/connectionstring:"server=ContosoSrv;integrated security=true;database=ContosoDB"
Answer:A
Microsoft 070-561-Csharp시험문제 070-561-Csharp
NO.2 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses the following LINQ query. var query = from o in orderLinesQuery where
(string)o["CarrierTrackingNumber"] == "AEB6-4356-80" select new { SalesOrderID =
o.Field("SalesOrderID"), OrderDate = o.Field("OrderDate") }; The CarrierTrackingNumber field in
the DataRow is nullable. You need to ensure that an exception does not occur if the
CarrierTrackingNumber field has a null value. Which code segment should you use?
A.var query = from o in orderLinesQuerywhere !o.IsNull("CarrierTrackingNumber")
&(string)o["CarrierTrackingNumber"] == "AEB6-4356-80"select new { SalesOrderID =
o.Field("SalesOrderID"), OrderDate = o.Field("OrderDate")};
B.var query = from o in orderLinesQuerywhere o.IsNull("CarrierTrackingNumber")
&(string)o["CarrierTrackingNumber"] == "AEB6-4356-80"select new { SalesOrderID =
o.Field("SalesOrderID"), OrderDate = o.Field("OrderDate")};
C.var query = from o in orderLinesQuerywhere o.Field("CarrierTrackingNumber") ==
"AEB6-4356-80"select new { SalesOrderID = o.Field("SalesOrderID"), OrderDate =
o.Field("OrderDate")};
D.var query = from o in orderLinesQuerywhere (string)o["CarrierTrackingNumber"] ==
DbNull.Value &(string)o["CarrierTrackingNumber"] == "AEB6-4356-80"select new { SalesOrderID =
o.Field("SalesOrderID"), OrderDate = o.Field("OrderDate") };
Answer:C
Microsoft 070-561-Csharp자격증 070-561-Csharp 070-561-Csharp 070-561-Csharp
NO.3 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database. You write the following code segment.
string queryString = "Select Name, Age from dbo.Table_1"; SqlCommand command = new
SqlCommand(queryString, (SqlConnection)connection)); You need to get the value that is contained in
the first column of the first row of the result set returned by the query. Which code segment should you
use?
A.var value = command.ExecuteScalar();string requiredValue = value.ToString();
B.var value = command.ExecuteNonQuery();string requiredValue = value.ToString();
C.var value = command.ExecuteReader(CommandBehavior.SingleRow);string requiredValue =
value[0].ToString();
D.var value = command.ExecuteReader(CommandBehavior.SingleRow);string requiredValue =
value[1].ToString();
Answer:A
Microsoft 070-561-Csharp 070-561-Csharp 070-561-Csharp
NO.4 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You write the following code segment. DataTable tblCustomer = new DataTable("Customer");
DataColumn parentCol= tblCustomer.Columns.Add("ID", typeof(int)); //Other columns added for
tblCustomer DataTable tblOrder = new DataTable("Order"); DataColumn
childCol=tblOrder.Columns.Add("CustomerID",typeof(int)); //Other columns added for tblOrder
DataSet ds = new DataSet(); ds.Tables.Add(tblOrder); ds.Tables.Add(tblCustomer); The
CustomerID column relates the Order DataTable to the Customer DataTable. You need to ensure
that when you delete a row in the Customer DataTable, the corresponding row in the Order
DataTable is deleted. Which code segment should you use?
A.ForeignKeyConstraint fCon = new ForeignKeyConstraint(parentCol, childCol);fCon.DeleteRule
= Rule.SetNull;tblOrder.Constraints.Add(fCon);
B.ForeignKeyConstraint fCon = new ForeignKeyConstraint(parentCol, childCol);fCon.DeleteRule
= Rule.Cascade;tblOrder.Constraints.Add(fCon);
C.ForeignKeyConstraint fCon = new ForeignKeyConstraint(parentCol, childCol);fCon.DeleteRule
= Rule.SetNull;tblCustomer.Constraints.Add(fCon);
D.ForeignKeyConstraint fCon = new ForeignKeyConstraint(parentCol, childCol);fCon.DeleteRule
= Rule.Cascade;tblCustomer.Constraints.Add(fCon);
Answer:B
Microsoft 070-561-Csharp 070-561-Csharp덤프
NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You write the following code
segment. DataTable tbl = new DataTable(); tbl.Columns.Add("Price", typeof(double)); //Other
columns added //Fill data You need to retrieve the maximum value in the Price column of the tbl
DataTable. Which code segment should you add?
A.double maxPrice = (double)tbl.Compute("Max(Price)", "");
B.double maxPrice = (double)tbl.Rows.Find("Max(Price)")["Price"];
C.double maxPrice = (double)tbl.Select("Max(Price)")[0]["Price"];
D.tbl.DefaultView.RowFilter = "Max(Price)";double maxPrice=(double) tbl.DefaultView[0]["Price"];
Answer:A
Microsoft dump 070-561-Csharp pdf 070-561-Csharp 070-561-Csharp
NO.6 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You write the following code
segment. (Line numbers are included for reference only.) 01 SqlConnection sqlconn 02 ... 03
SqlDataAdapter ordAdapter = 04 new SqlDataAdapter( 05 "SELECT OrderID, CustomerID,
OrderDate, Qty, UnitPrice,"+ 06 "UnitMargin FROM Sales.SalesOrderDetail", sqlconn); 07 DataSet
ord_ds = new DataSet(); 08 DataTable ord_dt = ord_ds.Tables.Add("Orders"); 09
ordAdapter.Fill(ord_dt); 10 ord_dt.Rows[0].BeginEdit(); 11 // The code here will insert, update and
delete rows to the ord_dt DataTable. 12 ord_dt.Rows[0].EndEdit(); 13 14 ord_dt.AcceptChanges();
You need to validate that every row that has the Qty column value is set to zero before you commit
any changes. Which code segment should you insert at line 13?
A.DataRow[] newRows = ord_dt.Select(null, null, DataViewRowState.CurrentRows);foreach
(DataRow newrow in newRows){ if(newrow.Field("Qty",DataRowVersion.Current) == 0) ...}
B.DataRow[] newRows = ord_dt.Select(null, null, DataViewRowState.CurrentRows);foreach
(DataRow newrow in newRows){ if(newrow.Field("Qty",DataRowVersion.Original) == 0) ...}
C.DataRow[] newRows = ord_dt.Select(null, null, DataViewRowState.ModifiedCurrent);foreach
(DataRow newrow in newRows){ if(newrow.Field("Qty",DataRowVersion.Current) == 0) ...}
D.DataRow[] newRows = ord_dt.Select(null, null, DataViewRowState. ModifiedCurrent);foreach
(DataRow newrow in newRows){ if(newrow.Field("Qty",DataRowVersion.Original) == 0) ...}
Answer:A
Microsoft덤프 070-561-Csharp 070-561-Csharp기출문제
NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has the following typed DataSets: A DataSet named DSCustomers with a
DataTable named Customers A DataSet named DSOrders with a DataTable named Orders You
write the following code segment. DSCustomers dsCust = new DSCustomers(); DSOrders dsOrd =
new DSOrders(); ... IDataReader rd; You need to expose the Customers DataTable and the Orders
DataTable by using a DataReader stream. Which code segment should you add?
A.rd = dsCust.CreateDataReader(dsOrd.Orders);
B.rd = dsCust.CreateDataReader(dsCust.Customers, dsOrd.Orders);
C.dsCust.Load(dsOrd.CreateDataReader(), LoadOption.Upsert, "Customers");rd =
dsCust.CreateDataReader();
D.DataTable tbl = new
DataTable();tbl.Load(dsOrd.Orders.CreateDataReader());tbl.Load(dsCust.Customers.CreateDataR
eader());rd = tbl.CreateDataReader();
Answer:B
Microsoft자격증 070-561-Csharp dump 070-561-Csharp 070-561-Csharp자격증
NO.8 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a typed DataSet named DSOrders. The DSOrders DataSet has two DataTables
as shown in the following sequence: 1. Orders 2. Customers You write the following code
segment. DSOrders ds = new DSOrders(); IDataReader rd; You need to expose the two DataTables
as a DataReader stream. You also need to ensure that the Customers DataTable is the first
DataTable in the stream. Which code segment should you add?
A.rd = ds.CreateDataReader(ds.Customers);
B.rd = ds.CreateDataReader(ds.Customers, ds.Orders);
C.ds.DefaultViewManager.CreateDataView(ds.Customers);rd = ds.CreateDataReader();
D.ds.Customers.Prefix = "0";ds.Orders.Prefix = "1";rd = ds.CreateDataReader();
Answer:B
Microsoft자격증 070-561-Csharp 070-561-Csharp시험문제
NO.9 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You write the following code segment. DataTable tbl = new DataTable(); DataColumn colId =
tbl.Columns.Add( "ID", typeof(int)); colId.AutoIncrement = true; tbl.Constraints.Add("Pkey", colId,
true); DataColumn colCtry = tbl.Columns.Add( "Country", typeof(string)); colCtry.DefaultValue =
"USA"; tbl.Columns.Add("Name", typeof(string)); You need to create a new row in the tbl
DataTable that meets the following requirements: The ID column is set to an auto-incremented
value. The Country column is set to the default value. The Name column is set to the value
"Customer A". Which code segment should you use?
A.tbl.Rows.Add(0, null, "Customer A");
B.tbl.Rows.Add(null, null, "Customer A");
C.tbl.Rows.Add(null, DBNull.Value, "Customer A");
D.tbl.Rows.Add(DBNull.Value, DBNull.Value, "Customer A");
Answer:B
Microsoft자료 070-561-Csharp인증 070-561-Csharp최신덤프
NO.10 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following
columns: ID OrderID ProductID Quantity LineTotal The OrderDetailTable object is populated with
data provided by a business partner. Some of the records contain a null value in the LineTotal field
and 0 in the Quantity field. You write the following code segment. (Line numbers are included for
reference only.) 01 DataColumn col = new DataColumn("UnitPrice", typeof(decimal)); 02 03
OrderDetailTable.Columns.Add(col); You need to add a DataColumn named UnitPrice to the
OrderDetailTable object. Which line of code should you insert at line 02?
A.col.Expression = "LineTotal/Quantity";
B.col.Expression = "LineTotal/ISNULL(Quantity, 1)";
C.col.Expression = "LineTotal.Value/ISNULL(Quantity.Value,1)";
D.col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)";
Answer:D
Microsoft 070-561-Csharp pdf 070-561-Csharp 070-561-Csharp pdf 070-561-Csharp
NO.11 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database. You write the following code segment.
string query = "Select EmpNo, EmpName from dbo.Table_1; select Name,Age from dbo.Table_2";
SqlCommand command = new SqlCommand(query, connection); SqlDataReader reader =
command.ExecuteReader(); You need to ensure that the application reads all the rows returned by the
code segment. Which code segment should you use?
A.while (reader.NextResult()){ Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.Read();}
B.while (reader.Read()){ Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.NextResult();}
C.while (reader.Read()){ Console.WriteLine(String.Format("{0}, {1}",reader[0],
reader[1]));}reader.NextResult();while (reader.Read()){ Console.WriteLine(String.Format("{0},
{1}",reader[0], reader[1]));}
D.while (reader.NextResult()){ Console.WriteLine(String.Format("{0}, {1}",reader[0],
reader[1]));}reader.Read();while (reader.NextResult()){ Console.WriteLine(String.Format("{0},
{1}",reader[0], reader[1]));}
Answer:C
Microsoft 070-561-Csharp 070-561-Csharp 070-561-Csharp 070-561-Csharp
NO.12 You create an application by using the Microsoft. NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You need to separate the
security-related exceptions from the other exceptions for database operations at run time. Which
code segment should you use?
A.catch (System.security.SecurityException ex) { //Handle all database security related
exceptions. }
B.catch (System.Data.Sqlclient.SqlException ex) { for (int i = 0; i < ex.Errors.Count; i++) { //Handle
all database security related exceptions. } else( //Handle other exceptions } } }
C.catch (System.Data.Sqlclient.SqlException ex) { for (int i = 0; i < ex.Errors.Count; i++) { //Handle
all database security related exceptions. } else{ //Handle other exceptions } } }
D.catch (System.Data.Sqlclient.SqlException ex) { for (int i = 0; i < ex.Errors.Count; i++) { //Handle
all database security related exceptions. } else{ //Handle other exceptions } } }
Answer:B
Microsoft 070-561-Csharp최신덤프 070-561-Csharp 070-561-Csharp 070-561-Csharp자격증
NO.13 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. The application uses an XML
file that contains product data. A corresponding XSD file contains the schema of the XML file. You
need to ensure that the application performs the following tasks: Loads the XML file in a typed
DataSet Validates the XML file against the schema provided in the XSD file What should you do?
A.Use the xsd.exe tool along with the /loadxml parameter to create a typed DataSet object that
contains the data from the XML file.
B.Use the xsd.exe tool along with the /dataset parameter to generate a typed DataSet object.Use
the DataSet.ReadXml method to load the typed DataSet object.
C.Add the XSD file to the schema collections of the XmlReader object.Load the XML file in the
XmlReader object.Iterate through the XML nodes of the XMLReader object to create a new typed
DataRow for each node.
D.Load the XML file in an XmlDocument object.Call the XmlDocument.Validate method to validate
the XML file against the schema.Iterate through the XML nodes of the XmlDocument object to
create a new typed DataRow for each node.
Answer:B
Microsoft덤프 070-561-Csharp덤프 070-561-Csharp 070-561-Csharp 070-561-Csharp
NO.14 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You run the application under
a Least-Privilege User Account (LUA) of the Windows operating system. You need to configure the
SQL Server 2005 connection string in the app.config file to use SQL Server Express user
instances. Which code segment should you use?
A.Data Source=\\SQLExpress;Integrated
Security=true;AttachDBFilename=|DataDirectory|\InstanceDB.mdf;Initial Catalog=InstanceDB;
B.Data Source=\\SQLExpress;Integrated Security=true;User
Instance=true;AttachDBFilename=InstanceDB.mdf;Initial Catalog=InstanceDB;
C.Data Source=\\SQLExpress;Integrated Security=true;User
Instance=true;AttachDBFilename=|DataDirectory|\InstanceDB.mdf;Initial Catalog=InstanceDB;
D.Data Source=\\SQLExpress;Integrated Security=false;User
Instance=true;AttachDBFilename=|DataDirectory|\InstanceDB.mdf;Initial Catalog=InstanceDB;
Answer:C
Microsoft자료 070-561-Csharp 070-561-Csharp덤프 070-561-Csharp dumps 070-561-Csharp dump 070-561-Csharp
NO.15 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application is used to retrieve records from a database named Sales. The database resides on a
Microsoft SQL Server 2005 server named ProdServer. The application connects to the database by using
an instance of the SqlConnection class that has the following connection string. "Data
Source=ProdServer;UID=SalesUser;PWD=Pa$$w0rd;" When the application calls the Open method of
the SqlConnection object, the following exception is thrown: "Cannot open user default database. Login
failed. Login failed for user 'SalesUser'". The default database for SalesUser is Sales. You need to ensure
that you can connect to the Sales database when the user account for the connection is SalesUser. What
should you do?
A.Create a login for SalesUser on ProdServer.
B.Create a database user object in the Sales database. Map the object to the SQL Server 2005 login of
SalesUser.
C.Modify the connection string in the following manner.
"Server=ProdServer;Database=Sales;UID=SalesUser;PWD=Pa$$w0rd;"
D.Modify the connection string in the following manner. "Data Source=ProdServer;Initial
Catalog=Sales;UID=SalesUser; PWD=Pa$$w0rd;"
Answer:B
Microsoft dump 070-561-Csharp자료 070-561-Csharp최신덤프 070-561-Csharp
NO.16 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses Microsoft SQL Server 2005. You write the following code segment. (Line
numbers are included for reference only.) 01 String myConnString = "User 02 ID=;password=;Initial
03 Catalog=pubs;Data Source=myServer"; 04 SqlConnection myConnection = new 05
SqlConnection(myConnString); 06 SqlCommand myCommand = new SqlCommand(); 07 DbDataReader
myReader; 08 myCommand.CommandType = 09 CommandType.Text; 10 myCommand.Connection =
myConnection; 11 myCommand.CommandText = "Select * from Table1; Select * from Table2;"; 12 int
RecordCount = 0; 13 try 14 { 15 myConnection.Open(); 16 17 } 18 catch (Exception ex) 19 { 20 } 21 finally
22 { 23 myConnection.Close(); 24 } You need to compute the total number of records processed by the
Select queries in the RecordCount variable. Which code segment should you insert at line 16?
A.myReader = myCommand.ExecuteReader();RecordCount = myReader.RecordsAffected;
B.while (myReader.Read()){ //Write logic to process data for the first result.}RecordCount =
myReader.RecordsAffected;
C.while (myReader.HasRows){ while (myReader.Read()) { //Write logic to process data for the second
result. RecordCount = RecordCount + 1; myReader.NextResult(); }}
D.while (myReader.HasRows){ while (myReader.Read()) { //Write logic to process data for the second
result. RecordCount = RecordCount + 1; } myReader.NextResult();}
Answer:D
Microsoft자격증 070-561-Csharp시험문제 070-561-Csharp 070-561-Csharp덤프
NO.17 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has an untyped DataTable object named tblCustomer. The tblCustomer object
contains a DataColumn named Age. You plan to create a ColumnChanging event handler for the
tblCustomer object. You need to ensure that when the existing data is modified, any value in the
Age DataColumn that is greater than 100 is set to DBNull. Which code segment should you use?
A.void ValidateChanges(object sender, DataColumnChangeEventArgs e){ if
(e.Column.ColumnName == "Age" & e.ProposedValue!=DBNull.Value){ if ((int)e.Row["Age"] >
100){ e.Row["Age"] = DBNull.Value; } }}
B.void ValidateChanges(object sender, DataColumnChangeEventArgs e){ if
(e.Column.ColumnName == "Age" & e.ProposedValue!=DBNull.Value){ if ((int)e.ProposedValue >
100){ e.Row["Age"] = DBNull.Value; } }}
C.void ValidateChanges(object sender, DataColumnChangeEventArgs e){ if
(e.Column.ColumnName == "Age" & e.ProposedValue!=DBNull.Value) { if ((int)e.Row["Age"] >
100){ e.ProposedValue = DBNull.Value; } }}
D.void ValidateChanges(object sender, DataColumnChangeEventArgs e){if
(e.Column.ColumnName == "Age" & e.ProposedValue!=DBNull.Value) { if ((int)e.ProposedValue >
100) { e.ProposedValue = DBNull.Value; } }}
Answer:D
Microsoft 070-561-Csharp dump 070-561-Csharp 070-561-Csharp기출문제
NO.18 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You write the following code segment. (Line numbers are included for reference only.) 01 private
List GetEmployers() { 02 List employers = new List(); 03 SqlCommand cmd = new SqlCommand();
04 ... 05 XmlReader reader = cmd.ExecuteXmlReader(); 06 while (reader.Read()) { 07 08 } 09 return
employers; 10 } The cmd object returns the following XML data structure. Shai Bassli Wingtip
Toys ... ... You need to populate the employers list with each employer entry in the XML data
structure. Which code segment should you insert at line 07?
A.if (reader.Name == "Emp.OrgName") { string employer = reader.ReadElementContentAsString();
employers.Add(employer);}
B.if (reader.Name == "Emp.OrgName") { reader.MoveToContent(); string employer = reader.Value;
employers.Add(employer);}
C.if (reader.Name == "Emp.OrgName" & reader.HasAttributes) { reader.MoveToFirstAttribute();
string employer = reader.Value; employers.Add(employer);}
D.if (reader.Name == "Emp.OrgName") { reader.MoveToFirstAttribute(); if (reader.HasValue)
{ string employer = reader.Value; employers.Add(employer); }}
Answer:A
Microsoft 070-561-Csharp인증 070-561-Csharp 070-561-Csharp dumps
NO.19 You create an application by using Microsoft .NET Framework 3.5. You use Microsoft ADO.NET
Entity Framework for persistence. You write a conceptual schema definition for the entity data
model in the following manner. You need to retrieve all the InvoiceNo property values for the
Customer entity instance that has the CustomerID property value as 1. Which entity SQL query
should you use?
A.SELECT o.InvoiceNo FROM ContosoEntities.Order as o,ContosoEntities.Customer as c WHERE
c.CustomerID=1
B.SELECT o.InvoiceNo FROM ContosoEntities.Order as o, ROW(o.Customer) as c WHERE
c.CustomerID=1
C.SELECT o.InvoiceNo FROM ContosoEntities.Order as o WHERE (Select REF(c) from
ContosoEntities.Customer as c WHERE CustomerID=1)
D.SELECT o.InvoiceNo FROM ContosoEntities.Order as o, o.Customer as c WHERE
c.CustomerID=1
Answer:D
Microsoft덤프 070-561-Csharp자료 070-561-Csharp기출문제 070-561-Csharp pdf 070-561-Csharp dumps
NO.20 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You write the following code
segment. string sql = "Select InvoiceNo,OrderAmount from Orders"; SqlDataAdapter adp = new
SqlDataAdapter(sql, con); DataTable tblOrders = new DataTable(); adp.Fill(tblOrders); If the value
of the OrderAmount column is greater than 1000, then a discount of 5 percent is calculated. You
need to create a DataColumn object named Discount that contains the discount value for each row
in the tblOrders DataTable. Which code segment should you use?
A.DataColumn col = new DataColumn("Discount");col.Expression =
"IIF(OrderAmount>1000,OrderAmount*5/100,0)";tblOrders.Columns.Add(col);
B.DataColumn col = new DataColumn("Discount");col.DefaultValue =
"IIF(OrderAmount>1000,OrderAmount*5/100,0)";tblOrders.Columns.Add(col);
C.DataColumn col = new
DataColumn("Discount");tblOrders.Columns.Add(col);tblOrders.Compute("Discount=OrderAmou
nt*5/100","OrderAmount>1000");
D.DataColumn col = new DataColumn("Discount");tblOrders.Columns.Add(col);col.Expression=
tblOrders.Compute("OrderAmount*5/100","OrderAmount>1000").ToString();
Answer:A
Microsoft dumps 070-561-Csharp덤프 070-561-Csharp 070-561-Csharp dumps 070-561-Csharp덤프 070-561-Csharp dumps
ITexamdump의 C_TFIN52_64덤프의 VCE테스트프로그램과 70-461덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-687시험에 대비한 고품질 덤프와 LOT-441시험 최신버전덤프를 제공해드립니다. 최고품질 C_TSCM62_65시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기