Symantec 인증250-240시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고ITExamDump의Symantec 인증250-240덤프자료에 주목하세요. ITExamDump의 Symantec 인증250-240덤프는 오로지 Symantec 인증250-240시험에 대비하여 제작된 시험공부가이드로서 시험패스율이 100%입니다. 시험에서 떨어지면 덤프비용전액환불해드립니다.
제일 빠른 시일내에 제일 간단한 방법으로Symantec인증 250-240시험을 패스하는 방법이 없냐구요? ITExamDump의Symantec인증 250-240덤프를 공부하시면 가능합니다. ITExamDump의Symantec인증 250-240덤프는 많은 분들이 검증한 가장 유력한Symantec인증 250-240시험공부자료입니다. 덤프의 문제만 기억하시면 패스는 문제없기에 제일 빠른 시일내에 시험을 패스하여 자격증 취득이 가능합니다.
여러분은 우리. ITExamDump의Symantec 250-240시험자료 즉 덤프의 문제와 답만 있으시면Symantec 250-240인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. ITExamDump의 덤프를 장바구니에 넣으세요. 그리고 ITExamDump에서는 무료로 24시간 온라인상담이 있습니다.
IT인증시험문제는 수시로 변경됩니다. 이 점을 해결하기 위해ITExamDump의Symantec인증 250-240덤프도 시험변경에 따라 업데이트하도록 최선을 다하고 있습니다.시험문제 변경에 초점을 맞추어 업데이트를 진행한후 업데이트된Symantec인증 250-240덤프를 1년간 무료로 업데이트서비스를 드립니다.
우리ITExamDump 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸 시험대비 자료들과Symantec 250-240인증시험의 완벽한 문제와 답들입니다. 그리고 우리ITExamDump에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다. 우리에 믿음을 드리기 위하여Symantec 250-240관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼수 있게 제공합니다.
시험 번호/코드: 250-240
시험 이름: Symantec (Administration of Storage Foundation 4.0 for UNIX)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 128 문항
업데이트: 2013-10-22
목표를 이루는 방법은 여러가지가 있는데 어느 방법을 선택하면 가장 빨리 목표를 이룰수 있을가요? Symantec인증 250-240시험을 패스하는 길에는ITExamDump의Symantec인증 250-240덤프를 공부하는 것이 가장 좋은 방법이라는것을 굳게 약속드립니다. ITExamDump의Symantec인증 250-240덤프는 시험문제에 초점을 두어 제작된 공부자료이기에Symantec인증 250-240패스를 가장 빠른 시일내에 한방에 할수 있도록 도와드립니다.
250-240 덤프무료샘플다운로드하기: http://www.itexamdump.com/250-240.html
NO.1 When using the New Volume Wizard in VEA, what are the two layout options available to create a
layered volume? (Choose two.)
A. Concatenated Mirrored
B. Striped Mirrored
C. Mirrored Striped
D. Mirrored Concatenated
Answer: AB
Symantec 250-240 250-240 250-240시험문제
NO.2 When using Volume Manager, what is considered the correct definition for RAID-5?
A. Combines mirroring with striping or concatenation where the mirroring occurs below the striping or
concatenation in order to mirror each column of the stripe or each chunk of the concatenation
B. Refers to mirroring where data from one disk is duplicated on another disk to provide redundancy and
enable fast recovery.
C. Refers to simple concatenation or striping where disk space is combined sequentially from two or more
disks or striped across two or more disks. RAID-0 does NOT provide data redundancy.
D. Refers to a striped layout that includes the calculation of parity information and the striping of that
parity information across the disks.
Answer: D
Symantec인증 250-240 250-240인증 250-240최신덤프 250-240자료
NO.3 What must be performed before creating an empty concatenated volume in a new disk group?
A. encapsulate the volume and assign a disk group
B. initialize the disks and assign them to a disk group
C. create an empty subdisk in the disk group and assign the volume
D. in VEA, select Actions -> Volume -> Disk Group -> New
Answer: B
Symantec시험문제 250-240 250-240
NO.4 In this volume layout the mirroring occurs below the striping or concatenation in order to mirror each
column of the stripe or each chunk of the concatenation. This type of layout is called a layered volume.
What is the correct RAID level for a volume layout that combines mirroring with striping or concatenation?
A. RAID-1+0
B. RAID-0+1
C. RAID-5
D. RAID-2
Answer: A
Symantec 250-240최신덤프 250-240 250-240 250-240
NO.5 What are three advantages of a concatenated volume layout? (Choose three.)
A. removes size restrictions
B. provides load balancing
C. better usage of space
D. simplifies administration
Answer: ACD
Symantec 250-240자격증 250-240 250-240
NO.6 Which three plex types are valid in Volume Manager? (Choose three.)
A. complete
B. partial
C. log
D. sparse
E. partition
Answer: ACD
Symantec인증 250-240 250-240최신덤프 250-240인증
NO.7 Which command is used to move the contents of the volumes from one disk to another?
A. vxremove
B. vxevac
C. vxdg move
D. vxdg evac
Answer: B
Symantec자격증 250-240 250-240 250-240
NO.8 You want to track changes to files and directories in a file system to improve performance of a search
engineapplication. Which VERITAS File System feature do you enable?
A. the intent log
B. the file change log
C. the object location table file
D. the quotas file
Answer: B
Symantec최신덤프 250-240 250-240 250-240기출문제
NO.9 Which two commands can be used to remove a mirror from a volume? (Choose two.)
A. vxassist remove mirror
B. vxdisk
C. vxremove mirror
D. vxplex
Answer: AD
Symantec 250-240 dumps 250-240
NO.10 In order to resize an existing volume and its file system in Volume Manager while it remains online,
the file system must be _____.
A. in the bootdg disk group
B. checked before the process
C. shared across disk groups
D. mounted during the process
Answer: D
Symantec덤프 250-240기출문제 250-240최신덤프 250-240
NO.11 Which three are characteristics of a disk group? (Choose three.)
A. collection of Volume Manager disks
B. eases the use of resources in a high availability environment
C. allows Volume Manager objects to span multiple disk groups
D. represents a management and configuration boundary
Answer: ABD
Symantec자료 250-240기출문제 250-240 dumps 250-240 dumps
NO.12 You have a disk group named testdg, which you want to rename to engdg. To rename the disk group
from the command line, you __________.
A. must destroy the disk group and then re-create the disk group using the new name
B. must use the vxdg change command, which performs a deport and an import in a single step
C. use vxdg deport followed by vxdg import, and the volumes are automatically started in the disk group
after the import
D. use vxdg deport followed by vxdg import, then you must manually start volumes in the disk group by
using the vxvol command
Answer: D
Symantec최신덤프 250-240최신덤프 250-240 dump 250-240
NO.13 You want to remove the datavol volume from the datadg disk group by using the command line. A file
system is currently mounted on the volume. You are sure that you do NOT need the data in the volume.
What is the appropriate sequence of steps to remove the volume and avoid system errors?
A. remove the volume by using the vxremove command (The file system will be unmounted automatically,
and the filesystem table file will be automatically updated to remove the entry for the file system.)
B. unmount the file system, then remove the volume using vxassist remove, and then manually edit the
file system tablefile to remove the entry for the file system
C. remove the volume by using the vxassist remove command (The file system will be unmounted
automatically;however, you must then manually edit the file system table file to remove the entry for the
file system.)
D. unmount the file system, then remove the volume using vxremove, and then manually edit the file
system table file to remove the entry for the file system
Answer: B
Symantec기출문제 250-240 pdf 250-240인증 250-240
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
NO.14 What is the virtual object that Volume Manager uses to represent the structured or ordered collection of
subdisks?
A. volume
B. plex
C. vmdisk
D. disk group
Answer: B
Symantec 250-240시험문제 250-240인증
NO.15 What are three advantages of a properly configured traditional mirrored volume layout? (Choose
three.)
A. improved reliability and availability
B. decreases the need for Volume Manager disks
C. improved read performance
D. fast recovery through logging
Answer: ACD
Symantec 250-240최신덤프 250-240 250-240 pdf
NO.16 You have used the vxprint command with the appropriate options to save information about the volume
layouts on your system. Now, you want to use vxprint to provide useful information that can be used later
as input for the vxmake command to help rebuild your volume configurations. Which option must be used
with vxprint?
A. -r
B. -t
C. -a
D. -m
Answer: D
Symantec dump 250-240기출문제 250-240 250-240 pdf
NO.17 Which two virtual objects are components of a Volume Manager volume? (Choose two.)
A. VM disk
B. subdisk
C. plex
D. physical disk
Answer: BC
Symantec 250-240자료 250-240시험문제 250-240 250-240 250-240덤프
NO.18 The Volume View window in VEA displays the characteristics of the volumes on the disks. After
selecting a volume or disk group in VEA, how is the Volume View window displayed?
A. Tools -> Volume View
B. Tools -> Volume -> View
C. Actions -> Volume -> View
D. Actions -> Volume View
Answer: D
Symantec자격증 250-240 250-240
NO.19 Which area of a disk is used by Volume Manager to store information such as disk headers,
configuration copies, and kernel logs?
A. the public region
B. the private region
C. the virtual region
D. the CDS region
Answer: B
Symantec dump 250-240 dumps 250-240자료
NO.20 You are analyzing the output of the vxdisk alldgs list command. There are no entries in the DISK and
GROUPcolumns; however, you see "online" in the output of the STATUS column. Which three explain the
"online" status of the disk in this scenario? (Choose three.)
A. The disk is in the free disk pool.
B. The disk has been initialized or encapsulated.
C. The disk is NOT currently assigned to a disk group.
D. The disk is currently deported on another system.
Answer: ABC
Symantec시험문제 250-240 dumps 250-240시험문제 250-240기출문제
ITexamdump의 646-048덤프의 VCE테스트프로그램과 644-068덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB3-701시험에 대비한 고품질 덤프와 70-341시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-442시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기