Oracle인증 1Z0-054시험은 등록하였는데 시험준비는 아직이라구요? Oracle인증 1Z0-054시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의Oracle인증 1Z0-054덤프와의 근사한 만남이Oracle인증 1Z0-054패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의Oracle인증 1Z0-054덤프로 시험패스에 고고싱하세요.
Oracle인증 1Z0-054시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. ITExamDump는 여러분을 위해 최신Oracle인증 1Z0-054시험에 대비한Oracle인증 1Z0-054덤프를 발췌하였습니다. Oracle인증 1Z0-054덤프는Oracle인증 1Z0-054시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면ITExamDump의 Oracle인증 1Z0-054덤프를 추천합니다.
ITExamDump의 Oracle인증 1Z0-054덤프는 다른 덤프판매 사이트보다 저렴한 가격으로 여러분들께 가볍게 다가갑니다. Oracle인증 1Z0-054덤프는 기출문제와 예상문제로 되어있어 시험패스는 시간문제뿐입니다.
지금 같은 상황에서 몇년간Oracle 1Z0-054시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게Oracle 1Z0-054시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ITExamDump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의1Z0-054시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ITExamDump 여러분은1Z0-054시험관련 최신버전자료들을 얻을 수 있습니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. Oracle인증 1Z0-054시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이Oracle인증 1Z0-054시험을 한방에 패스하도록 실제시험문제에 대비한Oracle인증 1Z0-054덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.
여러분이 우리Oracle 1Z0-054문제와 답을 체험하는 동시에 우리ITExamDump를 선택여부에 대하여 답이 나올 것입니다. 우리는 백프로 여러분들한테 편리함과 통과 율은 보장 드립니다. 여러분이 안전하게Oracle 1Z0-054시험을 패스할 수 있는 곳은 바로 ITExamDump입니다.
시험 번호/코드: 1Z0-054
시험 이름: Oracle (Oracle Database 11g: Performance Tuning)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 192 문항
업데이트: 2013-10-09
Oracle인증 1Z0-054시험을 가장 빠른 시일내에 가장 쉬운 방법으로 패스하는 방법을 고심초사한끝에 ITExamDump에서 연구해 내었습니다. 그건 바로ITExamDump의Oracle인증 1Z0-054덤프로Oracle인증 1Z0-054시험에 대비하는것입니다. ITExamDump의Oracle인증 1Z0-054덤프품질을 검증하려면 구매사이트의 무료샘플을 체험해보시면 됩니다.자격증을 많이 취득하여 멋진 IT전문가로 되세요.
1Z0-054 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-054.html
NO.1 You are working on a decision support system (DSS). The index is available on the COUNTRY_ID
column of the CUSTOMERS table.
View the Exhibit and examine the parameter settings and the query execution plan.
Why is the query using a full table scan instead of an index scan?
A. because the histogram statistics for the COUNTRY_ID column are not updated
B. because the index statistics for the index on the COUNTRY_ID column are not current
C. because the DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a higher value
D. because the optimizer predicts that most of the blocks in the table are accessed. Therefore, it uses a
full table scan, even though indexes are available.
ANSWER: D
Oracle 1Z0-054기출문제 1Z0-054 1Z0-054
NO.2 A user in a session executed the following SQL statement to set the optimizer mode:
ALTER SESSION SET OPTIMIZER_MODE = ALL_ROWS
What impact would it have on the goal of the optimizer for that session? (Choose all that apply.)
A. Statement level OPTIMIZER_MODE hints take precedence over the session-level setting.
B. The OPTIMIZER_MODE parameter set at instance level takes precedence over the session-level
value.
C. The optimizer uses a cost-based approach, regardless of the presence of statistics; it optimizes with a
goal of best response time.
D. The optimizer uses a cost-based approach for all SQL statements in the session, regardless of the
presence of statistics; it optimizes with a goal of best throughput.
ANSWER: AD
Oracle pdf 1Z0-054 1Z0-054덤프 1Z0-054
NO.3 The columns CUST_CITY, CUST_STATE_PROVINCE, and COUNTRY_ID are frequently used
together in the WHERE clause of the queries. The CUSTOMERS table is a big table with 20 GB of data.
You notice that the selectivity for these three columns varies from the selectivity that the optimizer
calculates.
What would you recommend to influence the selectivity calculated by the optimizer?
A. creating function-based indexes by concatenating all the columns
B. updating histogram statistics for these columns by using the DBMS_STATS.GATHER_TABLE_STATS
procedure
C. using the DBMS_STATS.CREATE_EXTENDED_STATS function to create a virtual column and create
index on the virtual column
D. using the DBMS_STATS.CREATE_EXTENDED_STATS function to create a virtual column and the
DBMS_STATS.GATHER_TABLE_STATS procedure to collect statistics on the virtual column
ANSWER: D
Oracle시험문제 1Z0-054 pdf 1Z0-054 1Z0-054 1Z0-054기출문제
NO.4 You are working on a development database that was upgraded to Oracle Database 11g from Oracle
Database 9i. An ADDM finding in this database says that the shared pool is inadequately sized, as shown
in the Exhibit.
You diagnosed that this is due to different kinds of workloads and this occurs only during peak hours. You
tried to resize this by shrinking the database buffer cache but that caused inadequate buffer cache
problems. The following are the related parameter settings:
SQL> show parameter sga
NAME TYPE VALUE
------------------------------ --------------- -----------------
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 300M
sga_target big integer 0
SQL> show parameter target
NAME TYPE VALUE
------------------------------ --------------- -----------------
.....
fast_start_mttr_target integer 0
memory_max_target big integer 0
memory_target big integer 0
pga_aggregate_target big integer 100M
sga_target big integer 0
You want to balance the memory between the System Global Area (SGA) components within SGA
without affecting the size of the Program Global Area (PGA).
Which action would solve this problem?
A. Set the SGA_TARGET parameter to 300M.
B. Set the SGA_MAX_SIZE parameter to 400M.
C. Set the MEMORY_TARGET parameter to 100M.
D. Set the MEMORY_MAX_TARGET parameter to 300M.
ANSWER: A
Oracle최신덤프 1Z0-054 1Z0-054최신덤프 1Z0-054 1Z0-054 pdf
NO.5 View Exhibit1 and examine the indexes on the CUSTOMERS table.
The statistics for the CUSTOMERS table have been updated recently by using the following command:
SQL> EXEC DBMS_STATS.GATHER_TABLE_STATS('SH','CUSTOMERS',method_opt=>'FOR ALL
INDEXED COLUMNS SIZE AUTO');
View Exhibit2 to examine a query plan. Even though the index is present on the COUNTRY_ID and
CUST_GENDER columns, the query uses a full table scan. What could be the reason?
A. because the histogram statistics for the COUNTRY_ID column are not updated
B. because the DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a high value
C. because the optimizer calculates the cost of accessing blocks by using a full table scan to be less as
compared to index scans, even though indexes are available
D. because indexes on CUST_GENDER and COUNTRY_ID columns are of different types, the index on
the CUST_GENDER column is bitmap index, and on COUNTRY_ID columns is btree index.
ANSWER: C
Oracle자격증 1Z0-054인증 1Z0-054인증 1Z0-054 dump
NO.6 You plan to use adaptive thresholds as part of the performance tuning activity. You decide to increase
the window size of the default moving window baseline for all metric observations and comparisons in
your database. The following error occurs when you try to increase the window size through Enterprise
Manager:
Failed to commit: ORA-13541: system moving window baseline size (1296000) greater than retention
(1036800) ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 601 ORA-06512: at line 2
Which action would allow you to perform the preceding task successfully?
A. increasing the flashback retention period
B. increasing the retention period for SQL Management Base
C. increasing the undo retention period for the database instance
D. increasing the Automatic Workload Repository (AWR) retention period
ANSWER: D
Oracle시험문제 1Z0-054 1Z0-054인증 1Z0-054
NO.7 View the Exhibit exhibit1 to examine the series of SQL commands and parameter settings.
View the Exhibit exhibit2 to examine the plans available in the SQL plan baseline.
The first plan (in red) is created when OPTIMIZER_MODE is set to ALL_ROWS and the second plan (in
blue) is created when OPTIMIZER_MODE is set to FIRST_ROWS.
Which SQL plan baseline would be used if the SQL query in exhibit1 is executed again when the value of
OPTIMIZER_MODE is set to FIRST_ROWS?
A. the second plan, because it is a fixed plan
B. the first plan, because it is an accepted plan
C. the second plan, because it is the latest generated plan in FIRST_ROW mode
D. A new plan, because the second plan in FIRST_ROW mode is not an accepted plan
ANSWER: B
Oracle시험문제 1Z0-054시험문제 1Z0-054 pdf 1Z0-054 1Z0-054기출문제 1Z0-054 dumps
NO.8 Examine the initialization parameter values for the instance given below:
NAME TYPE VALUE
------------------------------------ ----------- ------------------
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.6
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
db_file_multiblock_read_count integer 64
You notice that the one of the queries is using a full table scan (view Exhibit1) instead of index unique
scan (view Exhibit2). The index is present on the column that is accessed in the WHERE clause of the
query. The cost for a full table scan is more than that for an index unique scan.
Why would the optimizer choose full table scan over index unique scan? (Choose all that apply.)
A. The OPTIMIZER_INDEX_COST_ADJ initialization parameter is set to a low value.
B. The OPTIMIZER_INDEX_COST_ADJ initialization parameter is set to a high value.
C. The DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a low value.
D. The statistics for the table and all the indexes associated with the table are not current.
ANSWER: BD
Oracle 1Z0-054 1Z0-054기출문제 1Z0-054 dump
NO.9 Identify two correct statements about the Active Session History (ASH) data. (Choose two.)
A.A part of SGA memory is used to store ASH data as rolling buffer.
B.The ASH data can be analyzed between any two small time intervals.
C.All ASH data in memory are flushed to disk by MMON in every 3 seconds.
D.All ASH data in memory are flushed to disk by MMNL process whenever the buffer is full.
ANSWER: AB
Oracle인증 1Z0-054인증 1Z0-054 1Z0-054
NO.10 View the Exhibit and examine a portion of the output obtained from the following query:
SQL> SELECT * FROM v$sys_time_model;
Select three correct interpretations of the time model statistics. (Choose three.)
A. DB time includes the wait time of all the nonidle and idle user sessions.
B. SQL execute elapsed time includes the time spent in performing fetches of query results.
C. DB CPU includes the CPU time spent on database user-level calls and background CPU time.
D. SQL execute elapsed time includes components of the hard parse elapsed time like bind elapsed time.
E. DB time includes the connection management call elapsed time excluding the background process
time.
ANSWER: BDE
Oracle dump 1Z0-054 1Z0-054 1Z0-054자료
NO.11 You observed that some of the queries are performing poorly on the SALES_RECORDS table in your
database.
On further investigation, you find that at the end of each day the contents of the SALES_RECORDS table
are transferred to the SALES table and deleted from the SALES_RECORDS table. The deleted
operations cause the table to be sparsely populated.
You decided to use the ALTER TABLE...SHRINK SPACE COMPACT command to shrink the table.
Why would you choose this method? (Choose all that apply.)
A. because it can be used during peak hours
B. because it avoids unnecessary cursor invalidation
C. because it adjusts the high-water mark (HWM) immediately
D. because you have long-running queries that might span the shrink operation
E. because it does not allow any data manipulation language (DML) operations, thereby making the
shrink
operation faster
ANSWER: ABD
Oracle 1Z0-054 1Z0-054시험문제
NO.12 You are working on an online transaction processing (OLTP) system. By day most of the application
users perform queries accessing the most recently added or modified rows. The applications have most
of the queries based on multiple tables. But at night, some batch processing is also done.
Which two actions would you recommend to choose a goal for the optimizer based on the needs of your
application? (Choose two.)
A.setting the OPTIMIZER_MODE parameter to ALL_ROWS at the instance level
B.setting the OPTIMIZER_MODE parameter to FIRST_ROWS_n at the instance level
C.asking the developer to add a hint /*ALL_ROWS*/ in the long-running batch processing queries
D.asking the developer to add a hint /*FIRST_ROWS_n*/ in the long-running batch processing queries
ANSWER: BC
Oracle자료 1Z0-054 pdf 1Z0-054기출문제 1Z0-054
NO.13 View Exhibit1 to examine the description of the CUSTOMERS table.
You observed that optimizer selectivity is not accurate when the CUST_STATE_PROVINCE and
COUNTRY_ID columns are used together in the WHERE clause of a query.
View Exhibit2 to examine the query execution plan and the commands executed to gather the statistics.
The optimizer predicts that 20 rows will be processed rather than the 3,341 rows, which is the actual
number of rows returned from the table.
What can you do to make the optimizer detect the actual number of rows?
A. Set the STATISTICS_LEVEL parameter to ALL.
B. Set the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE.
C. Create extended statistics for the CUST_STATE_PROVINCE and COUNTRY_ID columns.
D. Increase the STALE_PERCENT value for the CUSTOMERS table by using the
DBMS_STATS.SET_TABLE_PREFS procedure.
ANSWER: C
Oracle dumps 1Z0-054 1Z0-054 pdf
NO.14 Examine the initialization parameter values for the instance given below:
NAME TYPE VALUE
------------------------------------ ----------- ------------------
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.6
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
db_file_multiblock_read_count integer 64
The index created on the column used in the WHERE clause of the query. You notice that the query is not
using the index. Instead of an index scan, a full table scan is used.
View the Exhibit and examine the autotrace output for a query.
What could be the reason for it? (Choose all that apply.)
A. The OPTIMIZER_INDEX_COST_ADJ initialization parameter has a low value.
B. The DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter has a low value.
C. The statistics for the table and all the indexes associated with the table are not current.
D. The table has less than DB_FILE_MULTIBLOCK_READ_COUNT blocks under the high-water mark.
ANSWER: CD
Oracle 1Z0-054 1Z0-054 pdf 1Z0-054 dump 1Z0-054덤프 1Z0-054인증
NO.15 You are working on an online transaction processing (OLTP) system. You detected free buffer waits
events for your database instance running in a machine that has multiple CPUs. You increased the
database buffer cache size as the first step. After a few hours of work on the database, further
investigation shows that the same event is being recorded.
What would be your next step to avoid this event in future?
A. Decrease the value of the DBWR_IO_SLAVES parameter.
B. Set the USE_INDIRECT_DATA_BUFFERS parameter to TRUE.
C. Increase the value of the DB_WRITER_PROCESSES parameter.
D. Increase the value of the DB_FILE_MULTIBLOCK_READ_COUNT parameter.
ANSWER: C
Oracle자료 1Z0-054 1Z0-054 1Z0-054 1Z0-054자격증 1Z0-054
NO.16 After running SQL Performance Analyzer (SPA), you observe a few regressed SQL statements in the
SPA output. Identify the two actions that you would suggest for these regressed SQL statements.
(Choose two.)
A.Running SQL Access Advisor
B.Adding them to SQL Plan Baseline
C.Submitting them to SQL Tuning Advisor
D.Running Automatic Database Diagnostic Monitor (ADDM)
ANSWER: BC
Oracle 1Z0-054 dump 1Z0-054 pdf 1Z0-054
NO.17 You work as a DBA for a company and you have the responsibility of managing one of its online
transaction processing (OLTP) systems. The database encountered performance-related problems and
you generated an Automatic Workload Repository (AWR) report to investigate it further.
View the Exhibits and examine the AWR report.
What could be the problem in this database?
A.Java pool is not configured.
B.The CPU in the system is slow.
C.The shared pool size is inadequate.
D.The database buffer cache is inadequate.
E.The OPEN_CURSORS parameter is set to a small value.
ANSWER: C
Oracle 1Z0-054자격증 1Z0-054 dump
NO.18 View Exhibit1 to examine the description of the CUSTOMERS table.
The CUSTOMERS table has been updated heavily today. In a frequently used SQL statement, you notice
that estimated rows and the actual number of rows fetched differ greatly. The COUNTRY_ID column has
an index.
View Exhibit2 and examine the query execution plan.
What would you recommend to improve the optimizer's estimation?
A. setting the STATISTICS_LEVEL parameter to ALL
B. setting the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE
C. creating extended statistics for the CUST_LAST_NAME, CUST_ID, and CUST_TOTAL columns
D. updating the statistics for the CUSTOMERS table by using the
DBMS_STATS.GATHER_TABLE_STATS
procedure
ANSWER: D
Oracle 1Z0-054자료 1Z0-054덤프 1Z0-054
NO.19 Which three factors influence the optimizer's behavior while choosing an optimization approach and
goal for a SQL statement? (Choose three.)
A.parsing of a SQL statement
B.operating system (OS) statistics
C.object statistics in the data dictionary
D.the OPTIMIZER_MODE initialization parameter
E.optimizer SQL hints for changing the query optimizer goal
ANSWER: CDE
Oracle기출문제 1Z0-054 1Z0-054 1Z0-054덤프 1Z0-054 1Z0-054
NO.20 A batch workload that historically completed in the maintenance window between 10:00 PM and
midnight is currently showing poor performance and completing at 2 AM.
To help in the diagnosis of the performance degradation, the senior DBA in your organization asks you to
execute the awrddrpt.sql script to produce a Compare Periods report.
Which two statements are true about the report produced by this script? (Choose two.)
A. It is refreshed automatically based on the moving window baseline.
B. It compares details between any two selected time periods of the same duration.
C. It normalizes the statistics by the amount of time spent on the database for each time period.
D. It compares details between two consecutive time periods of the same or different durations and is
refreshed every 60 minutes.
ANSWER: BC
Oracle시험문제 1Z0-054인증 1Z0-054인증
ITexamdump의 LOT-927덤프의 VCE테스트프로그램과 HP0-J62덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-463시험에 대비한 고품질 덤프와 100-101시험 최신버전덤프를 제공해드립니다. 최고품질 000-350시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기