여러분이 다른 사이트에서도IBM인증C2090-733시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.우리덤프의 문제와 답으로 여러분은 꼭 한번에IBM인증C2090-733시험을 패스하실 수 있습니다.
IBM인증C2090-733시험을 위하여 최고의 선택이 필요합니다. ITExamDump 선택으로 좋은 성적도 얻고 하면서 저희 선택을 후회하지 않을것니다.돈은 적게 들고 효과는 아주 좋습니다.우리ITExamDump여러분의 응시분비에 많은 도움이 될뿐만아니라IBM인증C2090-733시험은 또 일년무료 업데이트서비스를 제공합니다.작은 돈을 투자하고 이렇게 좋은 성과는 아주 바람직하다고 봅니다.
시험 번호/코드: C2090-733
시험 이름: IBM (DB2 9 Application Developer)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 140 문항
업데이트: 2014-01-23
ITExamDump의IBM인증 C2090-733시험덤프 공부가이드는 시장에서 가장 최신버전이자 최고의 품질을 지닌 시험공부자료입니다.IT업계에 종사중이라면 IT자격증취득을 승진이나 연봉협상의 수단으로 간주하고 자격증취득을 공을 들여야 합니다.회사다니면서 공부까지 하려면 몸이 힘들어 스트레스가 많이 쌓인다는것을 헤아려주는ITExamDump가 IT인증자격증에 도전하는데 성공하도록IBM인증 C2090-733시험대비덤프를 제공해드립니다.
인재도 많고 경쟁도 많은 이 사회에, IT업계인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지키고 있습니다.우리ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.
ITExamDump는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트입니다. ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려 져있습니다. 그리고 여러분에 신뢰를 드리기 위하여IBM C2090-733관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. 우리는ITExamDump제품에 대하여 아주 자신이 있습니다. 우리IBM C2090-733도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다. ITExamDump선택은 틀림없을 것이며 여러분의 만족할만한 제품만을 제공할것입니다.
ITExamDump의 IBM인증 C2090-733덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다. ITExamDump의 IBM인증 C2090-733덤프는 고객님이 시험에서 통과하여 중요한 IT인증자격증을 취득하게끔 도와드립니다. IT인증자격증은 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다. 학원공부나 다른 시험자료가 필요없이ITExamDump의 IBM인증 C2090-733덤프만 공부하시면IBM인증 C2090-733시험을 패스하여 자격증을 취득할수 있습니다.
ITExamDump 는 여러분의 IT전문가의 꿈을 이루어 드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도IBM 인증C2090-733 인증시험으로 고민하시고 계십니까? IBM 인증C2090-733인증시험 가이드를 사용하실 생각은 없나요? ITExamDump는 여러분께 시험패스의 편리를 드릴 수 있습니다.
C2090-733 덤프무료샘플다운로드하기: http://www.itexamdump.com/C2090-733.html
NO.1 After installing the DB2 Express-C 9 it was discovered that the Development
Workbench was not
available. What
was the reason for that?
A. It must be installed separately.
B. It is not supported with DB2 Express-C 9.
C. Since it is a licensed tool, it must be purchased from IBM.
D. Review the DB2 installation log for errors. Reinstall DB2 Express-C 9.
Answer: A
IBM pdf C2090-733 C2090-733인증
NO.2 After executing the following SQL statements: CREATE TABLE tab1 ( col1 INT ,col2
CHAR(1),
PRIMARY KEY(col1)); CREATE TABLE tab2 ( col1 INT ,col2 CHAR(1), FOREIGN KEY
(col1)
REFERENCES tab1(col1) ON DELETE CASCADE ON UPDATE NO ACTION ); INSERT
INTO tab1
VALUES(1, 'A'); INSERT INTO tab1 VALUES(2, 'B'); INSERT INTO tab2 VALUES(3, 'A');
INSERT INTO
tab2 VALUES(2, 'B'); UPDATE tab1 SET col1 = col1 + 1;DELETE FROM tab1 WHERE col2
= 'B';
What values will be returned by the following SQL query?SELECT col1, col2 FROM tab1
A.COL1 COL2
==== ==== 2 'B'
A. COL1 COL2 ==== ==== 2 'B'
B. COL1 COL2 ==== ==== 2 'A'
C. COL1 COL2 ==== ==== 1 'A' 2 'B'
D. COL1 COL2 ==== ==== 2 'A' 3 'B'
Answer: B
IBM자료 C2090-733최신덤프 C2090-733 C2090-733 C2090-733자료 C2090-733
NO.3 What is the minimum privilege required to run a User Defined Function (UDF)?
A. CALL
B. EXECUTE
C. SYSCTRL
D. SYSMAINT
Answer: B
IBM C2090-733 dumps C2090-733인증 C2090-733 C2090-733
NO.4 Which of the following is a characteristic of an application that uses a Distributed Unit of
Work
(DUOW)?
A. A single transaction can only read and/or modify data stored on one database server.
B. Multiple transactions can only read and/or modify data stored on one database server.
C. A single transaction can read and/or modify data stored across multiple database servers.
D. Multiple transactions can read and/or modify data stored on multiple database servers
provided each
transaction only accesses a single server.
Answer: C
IBM C2090-733 C2090-733자료
NO.5 A .NET application executes a SQL request invoking the
DB2Command.ExecuteReader method and a
syntax errorexception is thrown. Which of the following properties contains the SQLCode for
this syntax
error?
A. DB2Error.SQLCode
B. SQLError.SQLCode
C. DB2Exception.SQLCode
D. SQLException.SQLCode
Answer: A
IBM C2090-733 C2090-733자격증
NO.6 Which of the following restrictions pertains to embedded SQL external routines?
A. Environment variables with names that start with 'DB2' are not allowed.
B. Executing statements or commands that are connection related is not allowed.
C. Environment variable values that were set before the DB2 database manager is started
are not
available.
D. When returning result sets from external nested stored procedures, a cursor cannot be
opened with
the same name onmultiple nesting levels.
Answer: B
IBM C2090-733 C2090-733시험문제 C2090-733
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
NO.7 Which of the following ADO .NET providers is supported by IBM DB2 Add-ins for Visual
Studio?
A. OLE DB .NET Data Provider
B. DB2 Data Provider for .NET
C. ODBC Data Provider for .NET
D. DB2 for i5/OS .NET Provider
Answer: B
IBM C2090-733 C2090-733 dumps C2090-733덤프 C2090-733
NO.8 An SQL procedure has been developed with several inline SQL PL statements
encapsulated in a
dynamic compound SQL statement. The procedure had been tested and performed well.
After making a
change to the last SQL statement the procedure not only failed to complete, but did not
produce output
from any statements which were not modified. What is the best explanation for this behavior?
A. The dynamic compound SQL is atomic.
B. The procedure doesn't have any savepoints.
C. The procedure has not been correctly re-cataloged.
D. The dynamic compound SQL individual statements are logically dependent on each other.
Answer: A
IBM덤프 C2090-733 C2090-733자료 C2090-733 C2090-733 C2090-733
NO.9 Which of the following is a SQL stored procedure which will return a resultset
containing ID, NAME,
DEPT and JOB values out of the STAFF table?
A. CREATE PROCEDURE result_set() LANGUAGE SQL BEGIN SELECT id, name, dept,
job FROM
staff; END
B. CREATE PROCEDURE result_set LANGUAGE SQL RESULT SETS 1 BEGIN SELECT
id, name,
dept, job FROM staff; END
C. CREATE PROCEDURE result_set RESULT SETS 1 BEGIN DECLARE c1 CURSOR FOR
SELECT id,
name, dept, job FROM staff; OPEN C1; END
D. CREATE PROCEDURE result_set()
LANGUAGE SQL RESULT SETS 1 BEGIN DECLARE c1 CURSOR WITH RETURN FOR
SELECT id,
name, dept, job FROM staff; OPEN c1; END
Answer: D
IBM C2090-733 C2090-733덤프 C2090-733자격증
NO.10 Given the following table and view definitions: CREATE TABLE city ( cityid INT
GENERATED
ALWAYS AS IDENTITY , city_name CHAR(10), state_code CHAR(2) CHECK(state_code IN
('CA','IL','NY','OH','TX')));CREATE VIEW city_view AS ( SELECT city_name||','||state_code
AS fullname
FROM city WHERE state_code NOT IN ('OH','IL')); and the following trigger
definition:CREATE
TRIGGER city_viewInput INSTEAD OF INSERT ON city_view REFERENCING NEW AS
nFOR EACH
ROW MODE DB2SQLBEGIN ATOMIC DECLARE delim INT;SET delim = LOCATE(',',
n.fullname);
INSERT INTO city(city_name,state_code) VALUES(SUBSTR(n.fullname, 1, delim - 1),
SUBSTR(n.fullname, delim + 1, 2));END; If the following SQL statments are
executed:INSERT INTO city
VALUES(DEFAULT,'San Jose','CA') ; INSERT INTO city_view VALUES('Chicago,IL');
INSERT INTO city
VALUES(DEFAULT,'Detroit','MI'); INSERT INTO city VALUES(DEFAULT,'Austin','TX');
INSERT INTO
city_view VALUES('Denver,CO'); How many rows will be returned by the following query:
SELECT *
FROM city
A. 1
B. 2
C. 3
D. 4
Answer: C
IBM C2090-733자격증 C2090-733 C2090-733
NO.11 Given the following table definition:CREATE TABLE staff ( id SMALLINT NOT NULL,
name
VARCHAR(9), dept SMALLINT, job CHAR(5)) Assuming that the following statements
execute
successfully:Dim cmdStaff As DB2Command = cnDb2.CreateCommand()
cmdStaff.CommandText =
"SELECT name FROM staff WHERE (job = @job)" Which of the following is the correct way
to provide a
value for the parameter marker used?
A. cmdStaff.Parameters.Add("@job", "Mgr", CType(5, Char))
B. cmdStaff.Parameters.Add("@job", "Mgr", DB2Type.Char, 5)
C. cmdStaff.Parameters.Add(New DB2Parameter("@job", CType(5, Char))
cmdStaff.Parameters("@job").Value = "Mgr"
D. cmdStaff.Parameters.Add(New DB2Parameter("@job", DB2Type.Char, 5)
cmdStaff.Parameters("@job").Value ="Mgr"
Answer: D
IBM C2090-733기출문제 C2090-733 C2090-733 C2090-733 C2090-733
NO.12 Which of the following SQL statements demonstrates the correct usage of a
parameter marker?
A. SELECT ? FROM SYSCAT.TABLES
B. SELECT [] FROM SYSCAT.TABLES
C. SELECT CAST(? AS INTEGER) FROM SYSCAT.TABLES
D. SELECT CAST([] AS INTEGER) FROM SYSCAT.TABLES
Answer: C
IBM시험문제 C2090-733 pdf C2090-733인증 C2090-733최신덤프 C2090-733자격증
NO.13 Which of the following is the DB2 Data Provider for the .NET class that requires a
database connection
to be open?
A. DB2DataSet
B. DB2RecordSet
C. DB2DataReader
D. DB2DataAdapter
Answer: C
IBM C2090-733 dump C2090-733 dumps
NO.14 Parameter markers are NOT permitted for which of the following statements?
A. CALL
B. DELETE C. EXECUTE IMMEDIATE
D. SET CURRENT SQLID
Answer: C
IBM pdf C2090-733 dump C2090-733 C2090-733시험문제
NO.15 An application running against a DB2 for AIX database needs to execute the following
query:SELECT
t2.c2, t1.c3 FROM t1 INNER JOIN t2 ON t1.c1 = t2.c1 If table T1 resides in the DB2 for AIX
database and
table T2 resides in a DB2 for i5/OS database, which of the followingDB2 object types must
the identifier
T2 represent in order for this SQL statement to run successfully?
A. ALIAS
B. NICKNAME
C. SERVER TABLE
D. TABLE WRAPPER
Answer: B
IBM기출문제 C2090-733 dumps C2090-733최신덤프 C2090-733 C2090-733 C2090-733 dumps
NO.16 Two OLTP applications run concurrently but frequent locking occurs which requires a
fix to be applied.
Application A inserts rows into the table T1. Application B submits several queries against the
table with a
Cursor Stability isolation level. What would be the best course of action to improve the
system's
concurrency and performance?
A. Application B should be changed to access a view of table T1.
B. Application B should be changed to a Read Stability isolation level.
C. Application A should be changed to perform a commit after each INSERT operation.
D. Application A should be changed to include the NOT WITH HOLD clause on each INSERT
operation.
Answer: C
IBM C2090-733 dumps C2090-733
NO.17 If the following code is executed in the order shown:conDB2 As
DB2ConnectionconDB2.ConnectionString =
"Database=samplelx;UID=db2user;PWD=db2pwd;"conDB2.Open() Which of the following
statements is
correct?
A. An exception is thrown because the server name has not been specified.
B. An exception is thrown because the server name and the port have not been specified.
C. The execution is successful provided the host name SAMPLEX has been previously
defined in the
local hosts table.
D. The execution is successful provided the database alias SAMPLEX has been previously
defined in the
local database catalog.
Answer: D
IBM C2090-733 C2090-733 pdf C2090-733자료 C2090-733
NO.18 Given following table:
EMP
EMPNO NAME DEPTNO SALARY
=====
==== ======
======
0010 JOSH D95 30000
0020 JENNA D98 25000
0030 DYLAN
D95 10000
0040 TRACY D90 33000
and the following trigger definition:CREATE TRIGGER track_chgsAFTER UPDATE OF
salary, name,
empno ON emp REFERENCING NEW_TABLE AS ntable FOR EACH STATEMENT MODE
DB2SQLBEGIN ATOMIC INSERT INTO changes SELECT empno, CURRENT TIMESTAMP
FROM
ntable; END; After executing the following SQL statements:DELETE FROM changes;
UPDATE emp SET
deptno = 'D98' WHERE deptno = 'D95'; INSERT INTO emp VALUES('0050', 'KEN', 'D90',
35000);
UPDATE emp SET salary = salary - 500 WHERE salary > 35000;UPDATE emp SET salary =
salary +
1000 WHERE salary <= 25000;What value will be returned by this query?SELECT count(*)
FROM
changes
A. 2
B. 3 C. 4
D. 6
Answer: A
IBM C2090-733자료 C2090-733 C2090-733
NO.19 A table named ACTIVITY.LOG was created by executing the following
statement:CREATE TABLE
activity.log (event VARCHAR(128), date DATE) Then, a stored procedure named
ACTIVITY.LOGEVENT
was created by executing the following statement: CREATE PROCEDURE
activity.logEvent(IN stmtType
CHAR(1)) LANGUAGE SQLMainBody: BEGIN DECLARE sqlerrm VARCHAR(256)
DEFAULT '';
DECLARE ErrorIndicator CHAR(1) DEFAULT 'N';
SQLStmt: BEGIN
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION
BEGIN
SET ErrorIndicator = 'Y';
END;
IF stmtType = 'I' THEN
INSERT INTO activity.log VALUES('Insert Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'U' THEN
INSERT INTO activity.log VALUES('Update Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'D' THEN I
NSERT INTO activity.log VALUES('Delete Operation Performed.', CURRENT_DATE);
ELSE
SET ErrorIndicator = 'Y';
END IF;
END SQLStmt;
IF ErrorIndicator = 'Y' THEN
SIGNAL SQLSTATE '70000' SET message_text = 'Could not update activity log.';
END IF;
END MainBody
User USER1 has the authority to access/manipulate data in the ACTIVITY.LOG table as well
as to invoke
the
procedure ACTIVITY.LOGEVENT. If user USER1 executes the following commands:
CONNECT TO sample USER user1 USING ibmdb2;
DELETE FROM activity.log;
CALL activity.logEvent('i'); What will be the results?
A. The string "Insert Operation Performed." and the system date will be written to the
ACTIVITY.LOG
table.
B. The string "Update Operation Performed." and the system date will be written to the
ACTIVITY.LOG
table.
C. The string "Delete Operation Performed." and the system date will be written to the
ACTIVITY.LOG
table.
D. The error message 'SQL0438N Application raised error with diagnostic text: "Could not
update activity
log.".SQLSTATE=70000' will be generated.
Answer: D
IBM인증 C2090-733자료 C2090-733인증
NO.20 Table EMPLOYEE contains the following rows: EMPNO FIRSTNME LASTNAME
WORKDEPT
000010.CHRISTINE HAAS A00 000020 MICHAEL THOMPSON B01 000030 SALLY KWAN
C01 The
isolation level for Application 1 is set to CS and autocommit is disabled. The isolation level for
Application
2 is set to CS and the autocommit is enabled. The following statements are executed in
sequence:
Application 1:
DECLARE c1 CURSOR FOR SELECT * FROM employee ORDER BY empno OPEN C1
FETCH C1
FETCH C1 Application 2:
UPDATE employee SET lastname = 'MILLFORD' WHERE empno = '000020' Which of the
following
statements is correct?
A. The UPDATE succeeds because Application 2 runs with autocommit enabled so no row
level locks are
necessary for the update.
B. The UPDATE succeeds because Application 1 holds a row level lock that is compatible
with the lock
required by Application 2.
C. The UPDATE fails because Application 1 holds a row level read lock that is in conflict with
the lock
required by Application 2.C.
D. The UPDATE fails because the row level locks held by Application 1 have been escalated
to table lock
so updates by other connections are disallowed.
Answer: B
IBM C2090-733자료 C2090-733덤프 C2090-733최신덤프
ITexamdump의 C2040-442덤프의 VCE테스트프로그램과 70-561덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-E56시험에 대비한 고품질 덤프와 MB7-701시험 최신버전덤프를 제공해드립니다. 최고품질 642-385시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
시험자료링크: http://www.itexamdump.com/C2090-733.html